6mm Wire Cable Pulling Winch Machine Q345B steel Single Double Drum

Steel Wrie Rope Winding Single Or Doubler Drum For Electric Cable Pulling Winch

Introduction to pulling winch

The pulling winch consists of several parts, which are connected in series by wire rope. The working principle is to drive the whole system by the friction between the friction wheel and the wire rope, and the friction wheel is connected with the drive device. Generally, the width of the winch is within 1.5 m, which ensures the compactness and reliability of the entire transport unit. The traction winch is provided with tensioning device

We also supply LBS grooved drum used in all kinds of winchs. The whole drum details as follows:

1. the groove is cut directly into the body of drum.

2. according to the customer' requirements, the flanges are either welded or screw-bolted.

3. the groove is available as either LBS-groove or helical-groove.

4. groove geometry is determined by rope construction, diameter and length ,and by application.

5. the drum is provided with the requested mounting dimensions to fit the flanges by welding or screw bolting.

Sleeves are used to prevent damage to a drum. It is usually cheaper to replace a worn out sleeve in stead of replacing or repair the complete drum assembly.

The LBS split-sleeve system consists of a pair of outer shells that are bolted or welded onto a smooth drum to provide a grooving pattern. either LBS parallel grooves can be carved into sleeves. As with all LBS drums, the grooving in split sleeves is engineer to much the specific rope construction, diameter and length, and to suit

Steel Wrie Rope Winding Single Or Doubler Drum For Electric Cable Pulling Winch

We can design the LBS sleeve according to the drum's size and parameter.So the customer need to provide some paramter as follows:

Q345B steel cable pulling winch machine

6mm cable pulling winch machine

6mm Electric Power Winch

6mm Wire Cable Pulling Winch Machine Q345B steel Single Double Drum Images